|
American Lifeguard Products Repl
American Lifeguard Products - Taylor Replacement Reagents
And Save more with our Re-Fill Bottles
Reagents are available in single 2oz.bottle or in twelve 2oz.
bottle packs. Many of our reagents are also offered in Re-Fill quantity sizes
16oz, 32oz, and gallons.
-
DPD Reagent # 1, DPD Reagent # 2, DPD Reagent # 3 (2oz
bottles)
-
pH Indicator Solution, Cyanuric Acid Reagent (2oz bottles,
16oz, 32oz & gallons)
-
Hardness Reagent, Thiosulfate N/10, Total Alkalinity
Indicator (2oz bottles, 16oz & gallons)
-
Calcium Buffer, Acid Demand Reagent, Base Demand Reagent,
Sulfuric Acid, Calcium Indicator Liquid (2oz bottles & 16oz)
All reagents have a shelf life, whether they are liquids,
powders, crystals, tablets, or test-strip pads. If kept dry, powders and
crystals are very stable; acids are also long lived. Date of manufacture is not
the controlling factor when it comes to shelf life—storage conditions are more
important. As with all perishables, reagents are sensitive to environmental
influences and will last longer under controlled conditions. As a general
precaution, replace all reagents more than one year old, or at the beginning of
a new testing season.
- Storing reagents at a consistent temperature in the range of 36°-85° F
(2°-29° C); extreme temperature fluctuation, say from a refrigerator to a
hot car trunk, causes reagents to deteriorate.
- Keeping them out of prolonged direct sunlight. (Note: their brown
plastic bottles help protect very light-sensitive reagents.)
- Segregating reagents from containers of treatment chemicals.
- Replacing caps immediately and tightening them carefully so that
exposure to air and humidity is limited.
- Avoiding switching bottle caps, placing bottle caps on soiled surfaces,
or touching test strip pads.
Call for volume pricing on large Re-Fill Bottle orders.
Available for Purchase in the Continental US only.
  
|
